Development and Performance Evaluation of Sugarcane (Saccharum officinarum L.) Peeling Machine

Main Article Content

Shashank Verma
Vijay Kumar Singh
Vipul Chaudhary
Pramod Kumar Mishra
Harsh Prakash Sharma
Amisha Singh

Abstract

Sugarcane juice is a widely consumed refreshing beverage, particularly during the summer season, across many countries. The present study aimed to design, develop, and evaluate a sugarcane peeling machine using a CAD-based approach. The prototype was fabricated at the workshop of the Faculty of Agricultural Engineering, Mahamaya College of Agricultural Engineering and Technology, Ambedkar Nagar, with materials selected based on their mechanical strength and physical suitability for efficient operation. The developed machine incorporates a two-stage peeling mechanism, wherein the first stage employs an adjustable blade assembly to remove extraneous materials and nodal shoots, while the second stage utilizes the abrasive action of a wire wheel brush to achieve uniform peeling of the sugarcane surface. The performance of the machine was evaluated under varying operational parameters, including motor speed and sugarcane length, and the results indicated that an increase in these parameters led to a decline in peeling efficiency. In comparison to conventional manual peeling, the developed machine demonstrated improved hygiene, reduced labor requirement, and enhanced operational safety. The optimal performance was achieved at a motor speed of 1000 rpm with sugarcane lengths less than 200 cm, where the machine recorded a maximum peeling efficiency of 83.6% and a throughput capacity of 109.4 kg/h (approximately 113 canes per hour). Under these conditions, the minimum microbial load of 6.4 × 10⁵ CFU/ml and a high consumer acceptability score of 8.2 were observed. The findings indicate that the developed sugarcane peeling machine is an efficient, hygienic, and practical solution for small-scale juice vendors, offering improved performance and product quality compared to traditional manual peeling methods.

Article Details

Section
Articles