Computational and Experimental Analysis of Optimized Dual Throat Fluidic Thrust Vectoring Nozzle Configurations
Main Article Content
Abstract
Dual-throat Nozzle (DTN) is known as one of the most effective approaches of fluidic thrust-vectoring. It is flourishing into a promising technology to implement supersonic and hypersonic thrust-vector control in aircrafts. The main objective of the study is numerical investigation of the effects of secondary injection geometry and the cavity angles on the performance of a planar dual throat thrust-vectoring nozzle. The main contributions of the study is to consider the rate of secondary injection and cavity section with different angle configuration of the DTN, and the impacts is examined. 2-D compressible reacting simulations have been conducted in order to resolve the flow field in a dual throat nozzle with Nozzle pressure ratio of 5. The RANS equation, Energy equation is solved along with the standard k − ε model for the turbulence closure. Parameters such as convergence angle in the cavity & secondary injection angle are invoked to analyze the better thrust vectoring angle. Results reveal that a maximum vector angle of 10.96 degrees is a secondary injection rate equal to 20% of primary flow rate with a cavity convergence angle of 30 degrees. Findings suggest that the higher thrust vectoring is offered by a DTVN with higher cavity convergence angle with lesser percentage of secondary inlet.