Conceptual Design of a Nigeria-Calibrated Cooling-Load Estimation Tool for Air-Conditioning System Selection A Conceptual Framework Paper
Main Article Content
Abstract
Air-conditioning equipment in Nigerian residential and light commercial buildings is frequently selected using rule-of-thumb factors that relate room floor area to compressor horsepower. These factors were not derived from the local climate and do not separate the sensible and latent components of the cooling load. The result is recurring oversizing in some installations and undersizing in others, both of which reduce comfort, raise running cost, and shorten equipment life. This paper presents the conceptual design of a coolingload estimation tool calibrated to Nigerian conditions. The proposed framework adapts the component heat-gain approach described in established engineering references to the design temperatures, humidity levels, construction practices, and use patterns common in Nigeria. It defines the user inputs, the climatic data required for each location, the calculation sequence at room and building level, and the logic that converts an estimated load into a recommended equipment capacity. Two illustrative case studies, a residential room in Lagos and an office space in Abuja, are worked manually to show how the framework produces a defensible capacity figure and how that figure compares with a rule-of-thumb selection. The paper does not report a completed software product. It sets out the conceptual basis, the algorithmic logic, the proposed user interface flow, and a development roadmap covering prototype construction, expansion of the climatic database to cover Nigerian states and cities, field testing with practitioners, and validation against the measured performance of installed systems. The framework is offered as a preliminary design that requires further testing before it can be recommended for routine practice.